Skip to main content
Quick update showing off the terrain board after the oil wash dried—rich earth tones ready for gaming.

Finishing a Mossy Terrain Board With an Oil Wash

Basing & Terrain

Quick update showing off the terrain board after the oil wash dried—rich earth tones ready for gaming.

The steps

  1. Get the moss and texture work finished and fully dry before the oil goes anywhere near it.

  2. Thin the oil hard with mineral spirits and work it into the recesses rather than flooding the surface.

  3. Pull the excess back off while it is still wet, leaving it in the low points.

  4. Leave it a full day. Oil is touch-dry long before it is actually dry, and anything you do in between will lift it.

The Oil is Dry

We’re back in the dungeon. The oil is mostly dry today—I mean it’s not oil dry, but it’s not wet anymore. And I just wanted to show you.

See, we get a bunch of very rich earth—fertile for our imaginations.

Still Recovering

If you’ve been following the illness chronicles: the virus that got me sick is gone, but the bronchitis is still here. So it’s just rough breathing and talking.

But the board is done!

Full transcript of the video

All right, we’re back in the dungeon. Oil is mostly dry today. Uh I mean it’s not like oil dry, but it’s it’s not wet anymore. And I just wanted to show you. See, we get a bunch of a very rich earth fertile for our imaginations.

Okay, so if you’ve been following the the illness chronicles and also the the virus that got me sick is gone, but the bronchitis is still here. So, uh, it’s just rough breathing and talking.

More basing & terrain guides

Comments

Leave a Comment

Comments are moderated

Loading comments...

Watch the whole thing

Every guide here started as a video. The channel has the full session, mistakes included.

Watch on YouTube

Daily. No exceptions.