How to Prepare Bases for an Entire Army Quickly and Cheaply
250 bases in two hours with homemade basing material. Palette knife technique, finger cleaning, and the coffee grounds recipe.
The steps
Slop the texture on with a palette knife, firm but gentle.
Do not push it all the way down to the base. Leaving it proud is what keeps the texture natural instead of showing stroke marks.
Keep a bucket of water beside you and wipe old material off your hand in that, then clean the rim of the base.
Do not reach for a paper towel between bases. Over 250 bases that alone is the difference between an afternoon and a weekend.
The Least Glamorous Work
Sometimes the most productive hobby days are the least glamorous. This is a couple hours in the afternoon worth of work—all the bases ready for the orcs and goblins.
The Technique
Using that basing material we made a couple days ago with my palette knife. Coming in, slopping it on.
Be firm but gentle. Don’t push it all the way to the base. That way you still get natural texture without obvious strokes of the knife in it.
The Speed Trick
I have a bucket of water that I’m putting my hand in to wipe off the old material. Then quickly clean off the side of the base.
If you take the time to use a paper towel for this, it’s going to take forever and waste paper towels. Just use your finger, wipe it off real fast, and you’re good to go.
The Results
I was able to do all of these in about two hours of work.
This brings our total up to about 250 bases. And we’ve only used half of this jar. Pretty sweet.
The Recipe
If you want to see how I made this stuff, here’s the quick version:
- Old coffee grounds dried out
- Cook it in the oven
- Mix: 2 parts material, 2 parts spackle, 1 part paint
Thanks for watching. Tomorrow I start my goblin factory.
Full transcript of the video
Sometimes the most productive hobby days are the least glamorous. Uh this is a couple hours in the afternoon worth of work. I got all the bases ready uh for the orcs and goblins. And I just wanted to show you real quick how I do it so fast using that basing material we made a couple of days ago uh with my pallet knife. And I’m just coming in kind of slopping it on.
You want to be firm but gentle. You don’t want to push it all the way to the base. And that way you still get this natural texture without obvious strokes of the knife in it. And then I just have a bucket of water that I’m putting my hand in to wipe off the old like the old material. And then just very quickly and easily clean off the side of the base because if you take the time to use a paper towel to do this, it’s going to take you forever and waste some paper towels.
So just use your finger, wipe it off real fast, and you’re good to go. I was able to do these and these and these in about two hours worth of work. >> Now, this brings our total barrel >> amount of bases up to about 250 bases that we’ve done. And we’ve only used half of this jar. Uh, which is pretty sweet.
So, if you want to see how I made this stuff, if you didn’t catch my other video, I cut it down to be about 30 seconds long to show you how to make it. Uh, thanks for watching and I’ll catch you guys tomorrow when I start my goblin factory. This is old coffee grounds dried out and then you cook it in the oven. Two parts material, two parts spackle, one part paint.
More basing & terrain guides
Making stats for our teaspoon pet
Rolling up a pet in Teaspoon: a d8 down the line, the modifiers your creature type brings, and when to just pick a nature instead of rolling it.
How to Build a 16x16 Necropolis Board
Building a 16x16 diorama board for Necropolis out of foam offcuts, and where to get the free rules including the solo mode.
3D Printing KDM Terrain
A quick update on 3D printing Kingdom Death Monster terrain pieces, including a custom butcher base and encounter terrain.
Simple Lego Minifig Bases for D&D
A quick experiment making bases for Lego minifigures to use in D&D games on standard battle mats.
Comments
No comments yet. Be the first to share your thoughts!
Failed to load comments. Please try refreshing the page.